IP65 Panel Mount Displays — Industrial Panel Mount LCD Display & Monitors

Panel mount monitors flush-mount into a cutout on a control panel or enclosure with a sealed front bezel, protecting the electronics behind it from dust, water, and contaminants. AplusLCD supplies panel mount monitors rated from IP65 (splash-proof) to IP67 (temporary immersion) with a choice of aluminum or 316L stainless steel bezels — the stainless option meeting NEMA 4X for food washdown, cleanroom, and marine environments. All models support PCAP multi-touch through sealed glass and dual VGA & DVI with RS-232/USB touch control.

Choose the sealing level your environment actually demands

IP65 front sealing stops dust and low-pressure water jets — adequate for most factory floors and control rooms. IP66 adds protection against powerful jets, which suits washdown lines where hoses are used at close range. IP67 allows temporary immersion and is the safe choice for marine decks or equipment that may be pressure-washed.

Next, the bezel material

Powder-coated aluminum is economical and corrosion-resistant enough for standard industrial use. Bare or coated 316L stainless steel is specified when chemicals, salt, or cleanroom disinfectants are in play, because it will not pit or discolour over years of repeated cleaning. Every model mounts into a panel cutout sized to the bezel, with VESA or custom rear brackets available, and the sealed-glass front is flat so no debris can collect around the display.

The HMI of a sealed machine

Desktop monitors and open frame displays cannot do what a panel mount does: it is the man-machine interface of a sealed machine. On a production line the operator interacts only with the front glass while the electronics stay on the protected side of the panel, away from splashes, dust, and vibration. That is why sealed HMI displays are standard across demanding environments:

• Food and beverage lines — washdown with sanitizers
• Pharmaceutical suites — smooth, GMP-compliant surfaces that wipe down clean
• Marine and offshore platforms — salt-spray resistance
• Oil and gas skids — rugged, sealed operation near process equipment
• Outdoor kiosks and vehicle-mounted terminals — the sealed front paired with high brightness and anti-glare glass

The real cost is downtime, not hardware

Every unit is built with industrial-grade LCD panels, 50,000-hour LED backlights, and wide-temperature components rated for 24/7/365 operation, so your HMI keeps running between scheduled maintenance windows. All models accept single-unit sample orders with no MOQ, and our engineers confirm cutout dimensions, bezel material, touch interface, and cable routing against your existing panel design before you commit — send your control-panel drawing for a free fit check.

As a factory-direct panel mount monitor manufacturer, AplusLCD engineers sealed HMI displays to the mechanical and electrical drawings of your control panel — not the other way around. Every panel mount project is built in-house: aluminum and stainless bezel fabrication, PCAP touch lamination through sealed glass, controller board configuration, and final IP testing against the declared rating. Because we are the factory, bezel dimensions, cutout size, glass thickness, and cable exit can all be adjusted before tooling, so the display matches your enclosure exactly instead of forcing your panel design around a stock product.

Panel mount OEM orders follow a low-risk path: a single sample with no MOQ validates cutout fit, sealing, and touch behaviour on your actual line; a pilot batch of 10-50 units runs under real washdown or process conditions; and mass production then scales at 200-300 units per day with ISO 9001 process control. Custom artwork on the bezel, private-label branding, RS-232/USB touch interface selection, and optional high-brightness or anti-glare glass are all specified up front with transparent tooling quotes and no hidden engineering fees.