PCAP multi-touch, resistive, SAW, and infrared touch screen monitors. 7" to 43" sizes, true flat glass surface, IP65 options. 10-point multi-touch, anti-glare, metal/plastic/aluminum frame options. For kiosk, retail POS, gaming, and industrial HMI.
Open a series for model lists, mechanical drawings and interface options — or use the comparison table below.
True flat PCAP multi-touch monitors with seamless edge-to-edge glass surface. 10-point multi-touch support with smooth, responsive performance.
Cost-effective IP65 rated PCAP touch monitor with plastic frame. True flat design for easy cleaning and modern appearance.
IP65 rated PCAP touch monitor with aluminum frame. Combines durability and elegance with true flat design.
Complete touch panel module offerings including resistive, SAW, infrared, and PCAP touch technologies. Custom sizes and configurations available.
Size, brightness, resolution, touch, protection and interface — every series in this category, side by side.
| Series | Size Range | Touch | Protection | Interface |
|---|---|---|---|---|
| PCAP Multi-Touch Monitor — IP65 Aluminum Front Bezel 17 models | 7" ~ 43" | PCAP Multi-Touch | — | — |
| PCAP Multi-Touch Monitor — IP65 Plastic Frame with convex 14 models | 7" ~ 43" | PCAP Multi-Touch | IP65 water and dust resistance | — |
| True Flat Surface PCAP Multi-Touch Monitor — IP65 Aluminum Frame 14 models | 7" ~ 43" | PCAP Multi-Touch | IP65 water and dust resistance | — |
| Touch Panel Module (All Types) Multi-type | 5" ~ 86" | Resistive / SAW / Infrared / PCAP | — | USB or RS232 interface |
Values shown are the range covered by each series. Exact parameters per model are listed on the series page.
Selection Guide
Not sure which Touch Screen Monitor fits your machine?
Compare brightness, mounting and interface in 3 minutes — or send us the size, quantity and your enclosure drawing and we will confirm the right model within 24–48 hours.
AplusLCD supplies industrial touch screen monitors across every mainstream touch technology — PCAP multi-touch, resistive, SAW, and infrared — from 7" to 43", so the choice follows your application rather than the inventory of a single supplier. Metal, plastic, and aluminum frame options plus IP65 waterproof fronts cover public, industrial, and washdown deployments.
True flat designs eliminate bezel gaps where dust and debris accumulate, making the surface easy to clean in high-traffic environments.
Metal frames maximize durability, plastic lowers cost, and aluminum adds a premium, lightweight build. Optional IP65 waterproof fronts extend the range into washdown areas, outdoor kiosks, and food service, while 7H scratch-resistant glass stands up to heavy public use in retail and transportation settings.
The three complete-monitor series share the same touch technology options and driver stack, so the choice between them is mechanical: sealing level, frame material, and mount style. Choose the Touch Panel Module instead when you already have an enclosure and need only the touch layer, or when the required size runs past the 43" ceiling of the monitor series.
Self-service kiosks, retail POS terminals, gaming machines, industrial control panels, and healthcare workstations rely on AplusLCD touch monitors, all backed by plug-and-play drivers for Windows, Android, and Linux with full gesture support.
Slot machines, electronic table games and arcade cabinets use touch displays for the same reason kiosks do: the player interacts through glass, thousands of times a day. PCAP multi-touch behind a scratch-resistant, edge-to-edge glass surface is the default choice — 10-point gesture support, reliable operation with wet or gloved hands, and no bezel gap where dust and spilled liquid can collect. True-flat designs also wipe down cleanly during floor maintenance.
Touch is only one part of a gaming build — the panel still has to be cut to the cabinet opening and matched to the video interface on your controller board. For cut-to-size gaming panels, cabinet compatibility and the documentation pack that supports a gaming authority submission, see our touch displays for gaming cabinets.
What usually decides the configuration for touch screen monitor projects
PCAP (10-point), resistive (5-point), SAW, and infrared — choose the right technology for your use case
Edge-to-edge glass with no bezel gap — modern aesthetics and easy cleaning for public use
Sealed front panel rated IP65 for washdown areas, outdoor kiosks, and food service
Metal for durability, plastic for cost savings, aluminum for premium lightweight construction
Plug-and-play drivers for Windows, Android, and Linux with full gesture support
7H hardness rating for high-traffic public environments like retail and transportation
Where touch screen monitor are deployed
10-point PCAP touch with scratch-resistant glass for high-traffic self-checkout and check-in kiosks
True flat design with anti-glare treatment for modern retail point-of-sale counters
Responsive multi-touch with robust glass surface for slot machines and electronic table games
IP65 sealed touch panel with glove-compatible PCAP for factory floor human-machine interfaces
Flat, easy-to-clean surface with antimicrobial-compatible glass for medical carts and workstations
Large format PCAP touch for mall directories, museum exhibits, and campus information kiosks
Samples: 5–10 days · Custom OEM/ODM: 4–8 weeks
Standard products have no MOQ; custom products start at 3 pcs — validate fit, brightness and interface before volume.
Pricing, lead time and feasibility confirmed in writing for your configuration.
Explore complementary industrial display solutions from related categories
Tell us your requirements — size, brightness, touch type, mounting, and quantity. Our engineering team provides a tailored proposal — within 24–48 hours. Standard: no MOQ; custom: MOQ 3 pcs.
