All-in-one industrial panel PCs with Intel i3/i5/i7/i9 processors (also N100/J4125/J1900). 7" to 65" sizes, PCAP 10-point touch, IP65 front panel. Fanless design, Windows 10/11 PRO/IoT OS. For industrial automation, HMI, digital signage, and kiosk applications.
Open a series for model lists, mechanical drawings and interface options — or use the comparison table below.
Powerful Windows-based all-in-one industrial panel PC with Intel i3/i5/i7/i9 processors. Fanless design for reliable 24/7 operation.
Size, brightness, resolution, touch, protection and interface — every series in this category, side by side.
| Series | Size Range | Touch |
|---|---|---|
| All-in-one Industrial Panel PC 2 models | 7" ~ 65" | PCAP 10-point touch |
Values shown are the range covered by each series. Exact parameters per model are listed on the series page.
Selection Guide
Not sure which Industrial Panel PC fits your machine?
Compare brightness, mounting and interface in 3 minutes — or send us the size, quantity and your enclosure drawing and we will confirm the right model within 24–48 hours.
Industrial panel PCs integrate display, touch screen, and Intel computing hardware into a single rugged device — eliminating separate monitors, touch overlays, and external computers. AplusLCD offers Intel i3/i5/i7/i9 processors (plus low-power options such as N100, J4125, and J1900) on Windows 10/11 PRO/IoT for demanding industrial applications, with fanless passive cooling, IP65 front panels, PCAP 10-point multi-touch, and rich industrial I/O. Sizes run from 7" to 65" with 8/16/32/64/128GB RAM and 32GB-1TB storage.
The panel PC replaces the three-piece architecture of monitor, touch overlay, and industrial box PC with one sealed unit — a benefit that is measurable on the factory floor. There is no consumer cooling fan to pull dust into the electronics: fanless passive cooling keeps the enclosure sealed, silent, and maintenance-free through years of 24/7 operation. The IP65-rated front panel shrugs off water spray, oil mist, and cleaning chemicals, while the rear mounts through a standard panel cutout or on a VESA arm. Integration simplifies too — one device needs one power feed, one set of mounting hardware, and one image to manage, instead of three components with three different lifecycles.
Choose the Intel panel PC when the application depends on the Windows industrial ecosystem — SCADA and MES clients, legacy Windows drivers for PLCs and instruments, machine-vision frameworks, or proprietary factory software that has no Android equivalent. Choose an Android display when the deployment is a kiosk, menu board, or interactive terminal that only needs a modern app runtime and lower hardware cost.
Within the Intel range, match the processor to the workload: Celeron-class N100/J1900 options handle HMI and light SCADA; Core i3/i5 covers multi-window control rooms and data logging; i7/i9 provides the compute for machine vision and heavy analytics at the edge.
AplusLCD panel PCs carry native COM (RS-232/485) ports that talk directly to PLCs, barcode scanners, and weigh scales, plus multiple USB, Gigabit Ethernet, and HDMI for cameras and secondary displays. RAM from 8GB to 128GB and storage up to 1TB accommodate growing data retention and logging requirements, and Windows 10/11 PRO/IoT gives the IT team full domain join, GPO, and remote-management compatibility. Every unit is assembled and burned in at our ISO 9001 plant, ships with no MOQ for the first evaluation unit, and is supported by engineers who advise on mounting, I/O pinout, and image deployment for your specific line.
Three specifications settle most panel PC projects. Resolution comes first: a 1920x1080 panel PC covers HMI screens, SCADA dashboards, and machine-vision previews at native scale, while 1024×768 units remain the economical choice for simple operator terminals. Brightness follows the ambient light — indoor control rooms are served by 300-500 nits, but a 1000 nit panel PC with optical bonding and anti-glare glass holds its contrast behind glazed facades, in bright lobbies, and under daylight. Enclosure closes the list: an outdoor kiosk panel PC pairs a 1000-1500 nit high-brightness panel with IP65 front sealing, a wide-temperature Intel board, and a bonded anti-reflective cover glass, so the same unit survives sun, rain, and temperature swing. Send us the ambient light, cutout size, and resolution you need, and our engineers will configure the exact panel PC for your line — with a single evaluation unit available before any volume commitment.
What usually decides the configuration for industrial panel pc projects
Intel i3/i5/i7/i9 (plus N100/J4125/J1900) with Windows 10/11 PRO/IoT for industrial computing, SCADA, MES, and machine vision applications
No moving parts — silent operation, dust ingress prevention, and reduced maintenance
Waterproof and dustproof front rated for washdown and harsh factory environments
COM (RS-232/485), USB 2.0/3.0, Gigabit Ethernet, HDMI output for peripheral connectivity
10-point projected capacitive touch with glove-compatible and wet-operation support
Industrial-grade components rated for -20°C to +60°C operation without performance degradation
Where industrial panel pc are deployed
Intel-powered panel PC with COM ports for PLC communication in SCADA and MES applications
Built-in computing with WiFi for cloud-managed digital signage content distribution
Fanless panel PC for 24/7 building automation, HVAC control, and security system monitoring
High-performance Intel i7 panel PC for industrial machine vision and quality inspection HMI
IP65 front with antimicrobial-compatible surface for medical cart computers and nurse stations
AplusLCD manufactures industrial panel PCs in our own ISO 9001 plant, which lets OEM partners specify the computing core, memory, storage, I/O, touch, and enclosure finish as a single engineered product rather than a modified catalogue item. Typical OEM work includes preloading and licensing a customer Windows image, provisioning software with IT-management defaults, adding custom COM or USB port layouts, printing brand logos and control markings on the bezel, and matching the front finish to the machine or kiosk it controls. Because we build to order, the hardware matches your software and mounting design from the first unit, not after a long qualification cycle on a stock PC.
Panel PC OEM programmes follow an evaluation-first path: a single sample is configured exactly as production will ship it — your OS image, your I/O, your bezel — and run through 24/7 burn-in so integration risk is retired before volume begins. Approved programmes scale from pilot batches to production at 200-300 units per day with full component traceability and long-term availability commitments that match industrial equipment lifecycles. Volume pricing, private-label branding, and custom engineering are quoted up front with no hidden fees.
Samples: 5–10 days · Custom OEM/ODM: 4–8 weeks
1-pc samples accepted — validate fit, brightness and interface before volume.
Pricing, lead time and feasibility confirmed in writing for your configuration.
Explore complementary industrial display solutions from related categories
Tell us your requirements — size, brightness, touch type, mounting, and quantity. Our engineering team provides a tailored proposal — within 24–48 hours. No MOQ.
